AEG HE604078XB - Manual (Page 21)

Heat setting displays
Display Description
The cooking zone is off
- The cooking zone operates
Keep Warm
The automatic heat-up function is on
+ digit There is a malfunction
/ / OptiHeat Control (3 step Residual heat indicator): still cooking / keep
warm / residual heat
Lock/Child safety function is on
The automatic switch off is on
OptiHeat Control (3 step Residual heat indicator)
WARNING!
/ / Risk of burns from residual heat!
OptiHeat Control indicates the level of the residual heat.
OPERATING INSTRUCTIONS
You operate the hob with the knobs of the appliance that you installed with the hob.
The Operating Instructions chapter for this appliance tells how to operate the hob.
When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass
cooking zones and does not show that the appliance operates incorrectly.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off .
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates some time and the hob stops. Remove the object or clean the control
panel.
• you do not stop a cooking zone or change the heat setting. After some time comes on
and the hob stops. See the table.
Automatic Switch Off times
Heat setting , - - -
Stops after 6 hours 5 hours 4 hours 1.5 hours
/ Switching the outer rings on and off
You can match the effective heating surface to the size of the cookware.
Operating instructions 21