AEG HE604078XB - Manual (Page 22)

To switch on the outer ring touch the sensor field / . The indicator comes on. For
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.
The automatic heat up
Automatic heat up function sets the highest heat setting for some time, and then decreases
to the necessary level. To switch it on turn the cooking zone knob to the right until you see
in the display. After that set the heat setting immediately.
1
2
3
4
5
6
7
8
9
10
11
0
1 2 3 4 5 6 7 8 9
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch again and again until the indicator of a necessary
cooking zone comes on.
• To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with . The indicator of the cooking
zone starts to flash quickly. The display shows the remaining time.
• To change the Count Down Timer: set the cooking zone with . Touch or .
• To deactivate the timer: set the cooking zone with . Touch . The remaining time
counts back to 00 . The indicator of the cooking zone goes out. To deactivate you can
also touch and at the same time.
When the countdown comes to an end, the sound operates and 00 flashes. The cooking
zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
22 Operating instructions