AEG HTD 5616 - Manual (Page 22)

English
22
4. COOL SHOT (Cold Air)
: With this switch you can stop the heating
process.
Hold the button down in this position according to the
desired interval length. When the button is released it
returned automatically to the initial position.
Ionizing function –
Reduction of static in hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This process
supports safe, gentle drying of hair and also promotes a better
hair structure, maximizes hair volume, provides for a silky finish
and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the bottom switch to “
0” after use and disconnect from
the mains.
Storage
• Leave the device to cool before putting it away!
• Hang the device up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.
Cleaning and care
WARNING:
• Before cleaning remove the mains lead from the
socket.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.
1. Remove the air intake grill by simultaneously pushing and
pulling on the long sides with thumb and middle finger.
2. Remove any dirt that is present. If necessary, a fine brush
can be used.
3. Re-insert the air intake grill. The latches have to audibly
click into the recesses of the appliance.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 78 dB(A) (no limit)
Technical Data
Model: ................................................................................HTD 5616
Power supply: .....................................................220-240 V~, 50 Hz
Power consumption:.................................................. max. 2200 W
Protection class: ................................................................................II
Net weight: .............................................................................0.52 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.