2 asus ez flash 2 utility – Asus M3A78-T User Manual
Page 67
ASUS M3A78-T
4-3
4.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3. You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2
and press
You can switch between drives by pressing
is found. Then press
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
• This function can support devices such as USB flash disks or floppy disks
with FAT 32/16 format only.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.06
Current ROM
Update ROM
A:
Note
FLASH TYPE:
PMC 25LV080
PATH:
A:\
BOARD:
M3A78-T
VER:
0106
DATE:
07/02/08
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Enter] Select or Load [B] Backup [Esc] Exit
[Tab] Switch [Up/Down/Home/End] Move