System requirements, Ibm pcs and compatibles, Camera care and maintenance (cont.) – AGFA ePHOTO 1280 User Manual
Page 58
Camera Care and Maintenance (cont.)
◗
To clean the camera lens or LCD screen, blow away any surface dust or dirt. Then breathe
on the lens to form a mist and gently wipe it with a soft, lint-free cloth or lens cleaning
tissue.
◗
To avoid scratching the lens, use a gentle, circular motion when wiping.
◗
If necessary, clean battery contacts with a dry cloth before installation.
◗
If condensation develops inside the camera, stop using it immediately. Leave the camera
at room temperature for a few hours to allow the condensation to evaporate.
◗
Do not disassemble or attempt to repair the camera yourself. Refer all servicing to your
System Requirements
IBM PCs and Compatibles
◗
486 processor (Pentium
®
recommended)
◗
Windows 95 or Windows NT (3.51 or later)
◗
16 MB RAM
◗
50 MB available hard disk space
◗
VGA monitor with support for at least 256 colors
◗
2x CD-ROM drive (required for installation)
◗
9-pin RS-232C serial port
58