AGFA ePHOTO 1280 - Manual (Page 33)

Changing Advanced Settings (cont.)
Depending on your external flash configuration and aperture requirements, select from the
following options:
The sizes in this menu refer to the desired aperture size, and the times (in seconds) indicate
the shutter speed.
To use the external flash mode, follow these steps:
◗ Select a large, medium or small aperture based on these ranges:
LARGE f/2.8 – 3.5 wide or telephoto
MEDIUM f/5.6 – 6.4 wide or telephoto
SMALL f/8.0 – 9.1 wide or telephoto
◗ Select your shutter speed based on these criteria:
1/100 High-energy type external flash (typically over 1500 watts)
1/200 Low-energy type external flash (typically under 1500 watts)
33