AEG F88060VI0P - Manual (Page 22)

3. Press and hold buttons (4) and (5) at the same time until the indicators of buttons (3),
(4) and (5) flash.
4. Release buttons (4) and (5).
5. Press button (4).
• The indicators of buttons (3) and (5) go off
• The indicator of button (4) continues to flash
• The display shows the setting of the rinse aid dispenser.
Rinse aid dispenser is off.
Rinse aid dispenser is on.
6. Press button (4) to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions Width
Height
Depth
446 mm
818 - 898 mm
550 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
220-240 V
2100 W
10 A
50 Hz
Water supply pressure min.
max.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply 1) Cold water or hot water max. 60 °C
Capacity Place settings 9
1) Connect the water inlet hose to a water tap with 3/4" thread.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol . Put the packaging in applicable containers to
recycle it.
22 Technical data