AEG DC7003000M - Manual (Page 8)

Nonstick grill- / roasting pan
To bake and roast or as a pan to collect
fat.
Core temperature sensor
To measure how far the food is cooked.
Telescopic runners
For shelves and trays.
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 First Connection
When you connect the appliance to the
mains or after a power cut, you have to
set the language, display contrast, dis-
play brightness and time of day. Use the
shuttle to set the values. Press OK to
confirm.
4.3 Calibration
For best results with Auto Cooking , you
must calibrate the appliance. The cali-
bration time is 4 hours.
If you use manual cooking only,
you can ignore this procedure.
Conditions:
• The temperature in the kitchen must
be below 35 °C.
• Install the appliance in its permanent
location.
• Connect the appliance to the mains
supply and do not disconnect it again.
• If you change the appliance location
or electrical connection, you must do
the steps again.
Calibration:
1. Activate the appliance.
2. Select Basic Settings and press OK.
3. Select Calibration and press OK.
When you calibrate for the first
time, you can set the category
from the control panel or Auto
Cooking from the main menu to
start the procedure.
8 www.aeg.com