AEG DC7003000M - Manual (Page 15)

Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable to all heating functions
with Duration or Weight Automatic .
• Not applicable to heating functions
with the core temperature sensor.
Activating the function:
1. When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2. The display shows the message for
Extra Time .
3. Press to activate or OK to cancel.
4. When Extra Time is set on an addi-
tional minute appears.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
8.1 Auto cooking
This appliance has automatic pro-
grammes for cooking. Choose the cate-
gories from the control panel. Refer to
the Food Index supplied with this appli-
ance for the match between the cooking
categories and exemplary dishes. Use it
as a cooking aid. Automatic pro-
grammes use a preset temperature,
heating function and cooking time.
To use the automatic pro-
grammes, you must calibrate the
appliance.
Use the recommended accesso-
ries. Refer to the cooking tables
in the Helpful hints and tips
chapter.
Auto Cooking categories
Symbol Category
Baking
Roasting
Convenience
Oven Dishes
Pizza
Auto cooking:
1. Activate the appliance
2. Choose the dish and the category
from the food index.
3. Choose the category on the control
panel.
4. Follow the information on the dis-
play.
ENGLISH
15