beautypg.com

Temperature indicators, Temperature regulation, Dynamicair function – AEG SCN71800S0 User Manual

Page 8: Coolmatic function, Holiday function

background image

• Each time one of the two buttons is

pressed again the temperature is adjus-
ted by 1°C. The set temperature will be
reached within 24 hours.

TEMPERATURE INDICATORS

The temperature indicators show several
information:
• During normal operation, the tempera-

ture currently set for fridge and freezer
are displayed.

• When the temperature is being adjus-

ted a flashing display indicates the
fridge/freezer temperature currently
set.

TEMPERATURE REGULATION

To operate the appliance, proceed as fol-
lows:

1.

Set the required temperature by
pressing the corresponding tempera-
ture regulator. The temperature indi-
cator will immediately show the
changed setting and the temperature
indicator flashes.

2.

Each time the temperature regulator
is pressed the temperature is adjus-
ted by 1 °C. The set temperature will
be reached within 24 hours.

3.

The temperature indicator will change
from flashing to continuous illumina-
tion.

For a correct storage of the food the fol-
lowing temperatures should be set:
• +5 °C in the fridge
• -18 °C in the freezer.

When the setting is changed, the
compressor does not start imme-
diately if automatic defrosting is
currently taking place. As the stor-
age temperature within the fridge
is reached quickly you can store
food immediately after switching
on.

DYNAMICAIR FUNCTION

To switch on the function:

1.

Press the DYNAMICAIR button.

2.

The DYNAMICAIR indicator is shown.

To switch off the function:

1.

Press the DYNAMICAIR button.

2.

The DYNAMICAIR indicator goes off.

If the function is activated auto-
matically the DYNAMICAIR indica-
tor is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.

COOLMATIC FUNCTION

The COOLMATIC function is suitable for
quick cooling of large quantities of goods
in the refrigerator.
To activate the function, do these steps:

1.

Press the Fridge Temperature - but-
ton (several times if necessary) until
the word “SC” appears in the display.
A temperature of +2°C is automati-
cally selected.

To deactivate the function, do these
steps:

1.

Press the Fridge Temperature + but-
ton .

The COOLMATIC function stops
automatically after about 6 hours.

If the COOLMATIC function is switched
on the temperature setting may not be
changed.

HOLIDAY FUNCTION

This function allows you to keep the re-
frigerator shut and empty during a long
holiday period (e.g. the summer holidays)
without the formation of a bad smell.

The fridge compartment must be
empty when the holiday function
is on.

To activate the function:

1.

press continuously the temperature
regulator (+ button) until the letter
"H" (Holiday) appears on the temper-
ature indicator. The Holiday function
sets the temperature approx +15°C.
The refrigerator is in the energy-sav-
ing mode.

To deactivate the function:

1.

set the required temperature by
pressing the fridge temperature regu-
lator.

8

www.aeg.com