American Panel HURRICHILL AP120BCF1300-3 - Manual (Page 27)

AP120BC1000-3/ AP120BCF1300-3 Manual
26
zz. To change the time, press or then
press .
04:00 Blinks
aaa.To change the temperature, press or
then press .
-4 Blinks
bbb.To change the temperature, press or
then press .
3 Blinks
The display will show:
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
TOTAL TIME
H 04:00 MIN
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HOLDING LOW TEMP.
-4 °F
After about 2 seconds the display will automatically
change to:
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HOLDING HIGH TEMP.
3 °F
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
NOTE: PROGRAMMING FOR "DEFROST", "UV" & "HEAT PROBE" WILL BE THE SAME IN
MANUAL MODE AS IT IS IN AUTOMATIC MODE (see pages 20-22).