American Panel HURRICHILL AP120BCF1300-3 User Manual
Page 26
AP120BC1000-3/ AP120BCF1300-3 Manual
25
rr. To change the temperature, press
or
then press
.
28 Blinks
ss. To change the temperature, press
or
then press
.
35 Blinks
tt. To change the time, press
or
then
press
.
01:00 Blinks
uu. To change the temperature, press
or
then press
.
35 Blinks
vv. To change the temperature, press
or
then press
.
42 Blinks
The display will show:
PARAM. PROGRAMMING
MANUAL HARD CYCLE
LOW AIR TEMP PART 2
28 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HIGH AIR TEMP PART 2
35 °F
MANUAL SHOCK CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "M" will be "ON".
The LED'S for cycles will be blinking.
ww. Press the
button (for shock freezers only).
The LED for "SHOCK" will be steady "ON".
xx. To change the temperature, press
or
then press
.
-25 Blinks
yy. To change the temperature, press
or
then press
.
-15 Blinks
PARAM. PROGRAMMING
MANUAL MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
HIGH AIR TEMPERATURE
-15 °F
PARAM. PROGRAMMING
MANUAL SHOCK CYCLE
LOW AIR TEMPERATURE
-25 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
PROGRAMMING COMPLETE
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING HIGH TEMP.
42 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
MANUAL HARD CYCLE
TIME 2
H 01:00 MIN