AEG Voxtel D200 - Manual (Page 33)

33
UK
tPress
OK
and / to select your desired answer delay.
tPress
OK
to confirm.
11.5.6 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming
messages.
tPress and
/ to select “ANS. MACHINE“.
tPress
OK
and / to select “TAM SETTINGS“.
tPress
OK
and / to select “RECORD TIME“ (Available options:
“60S“, “120S“, “180S“ or “UNLIMITED“).
tPress
OK
and / to select your desired recording time.
tPress
OK
to confirm.
11.5.7 Call screening
When the answering machine is on and takes a call, you can listen to
the caller leaving a message. You can then identify the caller and decide
whether to take the call in person. The call can be screened at the base
and with any handset.
11.5.7.1 Screening at the base
By default, answering machine calls are played automatically through the
base speaker and the volume can be adjusted with the VOL + and VOL
-keys on the base.
If you don‘t want the caller to be heard when leaving a message, the base
screening can be turned off:
tPress and
/ to select “ANS. MACHINE“.
tPress
OK
and / to select “TAM SETTINGS“.
tPress
OK
and / to select “BS SCREENING“.
tPress
OK
and / to select “OFF“ or “ON“. (The current setting will
be indicated by a *.)
tPress
OK
to confirm the setting.
11.5.7.2 Screening with a handset
If the answering machine is set to ON, when there is an incoming message,
the handset will display “SCREENING?”
tPress to start call screening. Any Handset can listen to who is leaving
the message and decide whether to pick up the call or not.
tThe handset will display “SCREENING”.
tYou can adjust the earpiece volume by pressing
/ .
OR