AEG Voxtel D200 - Manual (Page 26)

26
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order
to de-register a handset from the base station. A de-registered handset
will have the antenna icon flashing and “REGISTER” on the display.
Note:
You cannot de-register the handset that you are currently using.
tPress and
/ to select “BS SETTINGS“.
tPress
OK
to show “DELETE HS“.
tPress
OK
and the display shows “PIN? ------”.
tEnter the 4-digit system PIN (default 0000).
tPress
OK
and the first handset number is displayed.
tPress
/ to scroll through the list of registered handsets and select
the number of the handset you want to de-register.
tPress
OK
to confirm, and the chosen handset will be de-registered.
10.6.4 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected
to a PBX. The recall time options are “SHORT“ (the default value of
100ms), “MEDIUM“ (300ms) or “LONG“ (600ms).
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “FLASH TIME“.
tPress
OK
and / to select your desired flash time (“SHORT“,
“MEDIUM“, “LONG“, with the current setting indicated by an asterisk
to the right).
tPress
OK
to confirm.
10.6.5 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use.
The default system PIN code is “0000“.
tPress and
/ to select “BS SETTINGS“.
tPress
OK
and / to select “CHANGE PIN“.
tPress
OK
and the display shows “PIN?------“
tEnter the old system PIN.
tPress
OK
to display “NEW PIN?------“, and enter your new 4-digit
system PIN.
tPress
OK
to display “CONFIRM?------“, and enter your new 4-digit
system PIN again.