AEG Voxtel D200 - Manual (Page 22)

22
tPress
OK
and then enter the date information in the format you set in
Section 10.1.1.
tPress
OK
to confirm.
Note:
If date has been set before, the current date will display, otherwise, “DD-
MM-YY ” will display.
10.2 Alarm Settings
You can set an alarm time on this phone. When an alarm is set, the alarm
icon is shown on the handset display. When the alarm time is reached,
the alarm icon and “ALARM ON“ flash on the handset display, and
the alarm tone rings for 45 seconds. You can press any key to disable the
alarm.
If the snooze function is activated,the alarm will sound again at the end of
the snooze period of seven minutes. You can also press and hold while
the alarm is sounding, to stop the alarm and turn off the snooze function.
Note:
>A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
>The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to “VOLUME OFF“, the
alarm still sounds at VOLUME 1 level.
>During an external call or internal call, if an alarm is set and when
the alarm time is reached, the and “ALARM ON” will still flash.
An alarm tone will be emitted from the earpiece to alert the user
the alarm time is reached. Once the user presses any key or presses
and holds to disable the alarm, the display will revert to the call
duration.
>During paging or ringing, the alarm will not sound when the alarm
time is reached. However, if the snooze function is enabled and there
is no paging or ringing, the alarm will sound again at the end of the
snooze period.
10.2.1 Turn on/off the Alarm
tPress and
/ to select “HS SETTINGS“.
tPress
OK
to show “ALARM“.
tPress
OK
and / to select “ON“/“OFF“.
tPress
OK
to confirm.