AEG KE8404021M - Manual (Page 16)

The core temperature sensor
must stay in the meat and in the
socket during the cooking.
6. When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically. Touch a sensor field
to stop the signal.
7. Remove the core temperature sen-
sor plug from the socket and remove
the meat from the oven.
To change the core temperature,
press
.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and the plug of the core temper-
ature sensor.
10.2 Inserting the accessories
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
indentions point down.
Wire shelf and deep pan together:
Put the wire shelf on the deep pan.
Push the deep pan between the guide
bars of the shelf support.
Useful information: • All accessories have small indentations
at the bottom of the right and left
16 www.aeg.com/au