AEG Voxtel D500 - d550bt - Manual (Page 20)

20
tPress
OK
to display “ENTER PIN”.
tEnter the 4-digit system PIN (default 0000).
tPress
OK
to display “CONFIRM?“
tPress
OK
to confirm, and the phone will be reset to its default
settings.
12 Troubleshooting
Problem Causes Solutions
No dialling tone when
pressing
t The connection cord
of the base station is
not plugged in.
t The adapter cord
is not plugged in
correctly in the base
station.
t Another handset is
using the base to
make a call.
t Wrong telephone
line cord.
t Check the
connections. Unplug
and plug back in the
mains. Check that the
telephone cord has
been plugged into
the base station and
the phone socket.
t Check the base
station plug and the
230V plug (remove
and plug-in).
t Wait until the line is
unoccupied.
When connect to a PBX,
no/or wrong connection
after dialling. Dialling prefix is
needed. Insert the dialling prefix.
“OUT OF RANGE“
is displayed.
t Base station out of
range.
t Base station not
connected to mains .
t Reduce the range.
t Connect base station
to mains.
No Display Empty Battery Recharge Battery