AEG Voxtel D500 - d550bt - Manual (Page 17)

17
UK
11.1.4 Set the date
tPress
OK
and / to select “HS SETTINGS“.
tPress
OK
and t / o select “DATE AND TIME“.
tPress
OK
and t / o select “SET DATE“.
tPress
OK
and then enter the date information in the format set
in Section 10.1.1.
tPress
OK
to confirm.
Note:
If a date was set previously, the current date is shown, otherwise
01/01/13 is shown.
11.2 Alarm settings
You can set an alarm time on this phone. When an alarm is set, the
icon is shown on the handset display. When the alarm time is reached,
the icon and
“ALARM ON” flash on the handset display, and the
alarm tone rings for 45 seconds. You can press any key to disable the
alarm. If the snooze function is activated, the alarm will sound again at
the end of the snooze period of seven minutes. You can also press and
hold while the alarm is sounding, to stop the alarm and turn off the
snooze function.
Note:
>A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
>The alarm volume level is the same as the settings of the handset
ringer volume. If the handset ringer is set to “VOLUME OFF“, the
alarm still sounds at “VOLUME 1“ level.
>During an external call or internal call, if an alarm is set and the
alarm time is reached, the icon and “ALARM ON” will still flash.
An alarm tone will be emitted the earpiece to alert the user the
alarm time is reached. Once the user presses any key or presses
and holds to disable the alarm, the display will revert to the call
duration.
>During paging or ringing, the alarm will not sound when the alarm
time is reached. However, if the snooze function is enabled and