AEG Voxtel S100 - Manual (Page 8)

8
1/3 battery power level.
Flashes when low battery power level is detected, needs
charging.
Cycle when, battery is charging.
5.3 Base station overview (see P4)
# Meaning
13
Find
Press the fi nd button on the base station to fi nd your
registered handset(s).
Press and hold to start registration process.
6 INSTALLING YOUR PHONE
6.1 Connecting the base station (see P5)
• Plug the power adapter and line cord into the base station.
• Plug the power adapter into a 210 - 230 V ac, 50/60 Hz mains socket and
the other end of the line cord into your telephone line socket.
Warning:
• Always use the line cord provided in the box. Other line cords may not
be compatible and may not work.
• Only use the power adapter supplied.
• The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
• Slide open the battery compartment cover.
• Place the 2 batteries with the correct polarity, as shown.
• Slide the battery compartment cover back.
• Put the handset on the base and charge for 15 hours before fi rst time
use. The handset beeps when charging starts.