AEG Voxtel S100 - Manual (Page 15)

15
UK
• Press
OK
and / to select the desired memory key from
M1
,
M2
and
M3
.
• Press
OK
to enter a new number or edit the number stored already.
• Press
OK
to confi rm.
10.3 Handset registration
Important:
When you purchase your phone, all handsets are already registered to
your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to 5 handsets per base
unit, with each handset‘s number (1 to 5) shown on its display.
• Press and hold on the base station for more than fi ve seconds, to
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must be
completed within this time.
• Press and / to select “REGISTER”.
• Press
OK
to display “BASE 1“.
• Press / to select which base number you want to use. (Note: a * will
be shown next to any base numbers the handset is already registered
with, and if selected the new registration will overwrite it.)
• Press
OK
to display “PIN?------“.
• Enter the 4-digit system pin (default 0000).
• Press
OK
to confi rm, and the display will show “SEARCH‘G”.
If the handset registration is successful, the display will change to standby
mode with the new handset number and the will stop fl ashing.
The handset will automatically be allocated the next available handset
number. If the handset registration is unsuccessful, the will still fl ash.
10.4 Reset Your Phone
You can reset your phone to the default settings. After reset, all your
personal settings including your PIN numbers, the redial list and call log
entries will be deleted. Also all the direct memory keys (M1-M3) and the
mailbox memory (key1) will be deleted.
• Press and
/ to select “DEFAULT“.
• Press
OK
and you are requested to enter the 4-digit pin (default 0000).