AEG SKD81800F0 - Manual (Page 15)

Cli-
mate
class Ambient temperature
T +16°C to + 43°C
7.2 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic pow-
er supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the do-
mestic power supply socket is not earth-
ed, connect the appliance to a separate
earth in compliance with current regula-
tions, consulting a qualified electrician.
The manufacturer declines all responsi-
bility if the above safety precautions are
not observed.
This appliance complies with the E.E.C.
Directives.
7.3 Installation of the CLEANAIR CONTROL Filter
TheCLEANAIR CONTROL Filter is an ac-
tive carbon filter which absorbs bad
odors maintain the best flavour and aro-
ma for all foodstuffs without risk of odor
cross contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
• Open the drawer.
• Take the filter out of the plastic bag.
• Insert the filter in the drawer.
• Close the drawer.
The filter should be handled
carefully so fragments do not
loosen from the surface.
Make sure that the air lever draw-
er is closed to obtain proper
function.
7.4 Door reversibility
The door of the appliance opens to the
right. If you want to open the door to the
left, follow these steps before you install
the appliance:
1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.
ENGLISH
15