AEG SCS81800F0 - Manual (Page 39)

1. Loosen the upper pin and remove the
spacer.
2. Remove the upper pin and the upper door.
3. Remove the hinge cover (A). Unscrew
the pins (B) and spacers (C). Fit the hinge
cover (A).
4. Remove the lower door.
5. Loosen the lower pin.
On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the upper
pin.
A
B
C
Installation 39