AEG L61270BI - Manual (Page 15)

10.4 Setting the options
Depending on the programme, different
functions can be combined. Not all the
options are compatible among
themselves. A wrong selection is
indicated by the message
on the
display and a blinking of the Inicio/Pausa
button.
To set an option:
1. Press Fun./Funç. button: all the
option indicators appear on the
display.
2. Press the same button to scroll all the
available options. Each option
indicator illuminates on the display
and starts blinking.
3. Press OK button to activate and
confirm your choice. A black dash
appears under the selected indicator
to show that this option has been set.
4. Press button to deactivate the
option.
5. Once you have set the options, wait
a few seconds until the display gets
back to the default status. The
indicator of the set option stay on.
10.5 Starting the programme
Press button Inicio/Pausa to start the
programme. The corresponding red
indicator stops blinking.
The indicator is on to indicate the
door is locked. To interrupt a
programme which is running, press the
button Inicio/Pausa: the corresponding
red light starts blinking.
To restart the programme from the point
at which it was interrupted, press Inicio/
Pausa button again.
If you have chosen a delayed start, the
appliance will begin the countdown.
If you set an incorrect option, the yellow
indicator of button Inicio/Pausa blinks for
3 times. The display shows the message
Err for some seconds.
10.6 Starting a programme
with the delay start
Set this option before you press button
Inicio/Pausa.
• Press button Inicio Diferido
repeatedly to set the desired delay.
The symbol appears on the display.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2 hours
and then by 1 hour up to a maximum of
20 hours.
The set delay time value appears on the
display for about 3 seconds, then the
duration of the programme appears
again.
Before you press button Inicio/Pausa you
can modify or cancel the delay time at
any moment.
The door will be locked throughout the
delay time. If you wish to add laundry in
the appliance during the delay time,
press the button Inicio/Pausa to set the
appliance to pause. When the indicator
goes off , the door can be opened.
Add the laundry, close the door and
press button Inicio/Pausa again.
Setting the delayed start
• Set the programme and the required
options.
• Set the delay start.
• Press button Inicio/Pausa: the
appliance starts its hourly countdown.
The programme starts after the
selected delay has expired.
Cancelling the delayed start
• Press button Inicio/Pausa to set the
appliance to PAUSE;
• Press button Inicio Diferido until the
symbol ’ is displayed;
• Press button Inicio/Pausa again to
start the programme.
The set delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with Drain
programme.
10.7 Altering an option or a
running programme
It is possible to change some options
before the programme carries it out.
Before you make any change, you must
ENGLISH 15