ADT Security Services 8112 - Manual (Page 7)

Your Custom Display
“At an idle state” means that the system is not currently performing a function entered by a user. There are three idle
states the system may be in:
• Turned on (Armed)
• Turned off (Disarmed) with no points faulted (doors or windows open) in the area
• Turned off with faulted points (doors or windows open) in the area.
This guide uses the default idle state displays for examples of these idle states. Your security company may have
programmed custom text for the idle displays in your system. The custom text and the default text for the three
system idle displays follow.
Custom Displays Default Text / Function
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREA _ IS ON
Indicates the area is turned on (armed) and ready to detect intruders.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREA _ IS OFF
Indicates the area is turned off (disarmed). 24-hour points remain armed.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ AREA _ NOT READY
Indicates that the area is turned off, but not ready to arm. Perimeter and/or
interior points are faulted (doors or windows open).