Noises – AEG S74010KDX0 User Manual

Page 19

• Pull the cable through the hinge (1).
• Screw on the lower hinge with 3 screw

(2).

• Insert the cable holder and screw on

this (3).

• Connect the cable (4) which comes

from the door.

• Use a small screw driver to remove the

bushing on the top of the door and
move it to the opposite side on the
door.

• Install the handle on the opposite

side.

• Raise the appliance and install the

ventilation grill.

• Put the cabinet in position.

WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power
socket.

Do a final check to make sure that:
• All screws are tightened.

• The magnetic seal adheres to the cab-

inet.

• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.

8. NOISES

There are some sounds during normal
running (compressor, refrigerant circula-
tion).

BRRR

HISSS!

CLICK!

BLUBB!

CRACK!

SSSRR

ENGLISH