Xerox DocuColor 2240-1537 - Manual (Page 86)

2–80
U S E R G U I D E (P R I N T )
C. Special Printing
Specifying Output Color for Printing in a PCL Driver
You can specify the output color for printing.
From the Output Color menu of either the Paper/Output or
Graphics tab, select Black or Auto.
Printing with Black
To print in black and white, select Black from the Output Color
menu.
Print Mode
Specify whether to give priority to the print speed or the image
quality. The printer/copier is capable of printing at three different
resolutions:
High Speed: 600 x 600
Standard: 1200 x 600
High Quality: 1200 x 1200
To change resolution settings, use the Print Mode selections.
NOTE: The Image Enhancement feature is not available when
Standard or High Quality is selected.
NOTE: If printing is slow even when High Speed has been
selected, try setting Print Page Mode on the Configuration tab to
On. The printing time may be shortened.
Options Contents
High Speed Prints faster but with a loss of image
quality.
Standard The average mode of High Speed and
High Quality.
High Quality Prints with better quality but slower