Xerox WorkCentre M24-6071 - Manual

Fig. 1
Top left cover
Gently open the top left cover while lifting up the release lever.
Fig. 2
If the edge of the jammed paper can be reached at the output tray, pull
the jammed paper in the direction of the feed-out area.
Fig. 3
If you cannot remove jammed paper, then inside the fuser unit, lift up
the green lever and remove the jammed paper.
Fig. 4
Duplex Module Cover
Open the tray 5 (Bypass) and gently open the duplex module cover.
Fig. 5
Remove the jammed paper.
Fig. 6
Tray 5 (Bypass)
Inspect the inside (paper feed entrance) of Tray 5 (Bypass), and remove
any jammed paper.
Removing Paper Jam - 1 of 2