Offset stacking, Country code (iso), Offset stacking country code (iso) – Xerox WorkCentre M118i-6288 User Manual

Page 130

9 Setups

130

Xerox CopyCentre/WorkCentre 118 User Guide

Repeat Start – Specify the period of time when the button is continued to press to start
this feature.
Repeat Interval – Specify the interval to change the setting values.

Offset Stacking

Use this feature to specify whether or not the machine should offset the output.

Country Code (ISO)

Use this feature to set the country code for the following country settings.

• Paper size

• Daylight savings

• Date and time format

• Fax connection approvals
Set required country code referring to Country Code List on page 213. For details of
paper sizes, refer to Document Size Detection Table on page 198.
The daylight saving, as well as the date and time format, for the printer feature must be
specified separately. Refer to Machine Clock on page 143.
NOTE: Before changing the country code, be sure to the following.

– The phone line and network cable are disconnected to avoid processing any new

job.

– All the jobs have been finished on the machine.
– For the machine with the Fax option, the Ram memory is 100% available.

NOTE: The machine automatically changes all the above settings, and may affect the
fax connection. When you want to change either daylight saving, or the date and time
format, refer to Fax Settings on page 146.

Select [Country Code] on the [Common
Setting] screen using the