Xerox WorkCentre M118-M118i-15205 - Manual (Page 84)

9 USB Port
84 Xerox CopyCentre/WorkCentre 118 System Administration Guide
Test Print
To make sure that the machine has been installed on the USB port correctly, submit a
test print from a client workstation. Perform the following steps.
1. Open a document on a workstation.
2. Select the machine as the printer to which the document will be sent.
3. Print the selected document on the machine and verify that it prints correctly.
4. Repeat the test for all workstations that will be sending jobs to the machine.
The installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for assistance.