Xerox WorkCentre M118-M118i-15205 - Manual (Page 52)

4 UNIX TCP/IP
52 Xerox CopyCentre/WorkCentre 118 System Administration Guide
Example
To delete the print data from printer fxPS for job number 351, enter the following
command:
%lprm -PfxPS 351
Printer Status
Solaris/HP-UX
The lpstat command is used to inquire about the status of the machine.
NOTE: In the non-spool mode, this function is available to Windows NT clients but not
to HP-UX/Solaris clients.
Command format
lpstat [option]
Command options
The following command options are available.
If no option is specified, all the print data-related information will be displayed.
The sequence of the options does not affect the outcome.
To use more than one argument at the same time, separate them by commas and
enclose all the arguments with “ ”.
E.g. %lpstat -u “user1,user2,user3”
• -o [printer name]
This option displays the print data for the specified printer.
• -t
This option displays all the information.
• -u [user name]
This option displays information about print data received from specified users.
• -v [printer name]
This option displays the printer name and the path name for the machine. The printer
name is specified in the argument.
NOTE: Long file names will be truncated.
NOTE: Information for a maximum of 64 print instructions can be displayed.
NOTE: If two or more types of print languages/modes are set up on a single
workstation, identical job numbers may be displayed when an inquiry command
(lpstat) is issued.