Xerox WorkCentre M118-M118i-15205 - Manual (Page 129)

Xerox CopyCentre/WorkCentre 118 System Administration Guide 129
14 Glossary
This chapter contains a list of terms used in the System Administration Guide. Each
term has a corresponding definition that reflects the meaning of the term as it is used
in this Guide.
Terms Defined
Use the following definitions to learn more about the meanings of terms used in this
Guide.
10Base-T A specification for baseband Ethernet running up to 10-Mbps
on two pairs of twisted-pair wiring: one pair for transmitting
data and the other for receiving. To guarantee proper signal
timing, 10BaseT has a distance limit of approximately 100
meters per segment. Based on the IEEE 802.3 standard. See
also Ethernet and IEEE.
100Base-TX A specification for baseband Ethernet running up to 100-Mbps
on two pairs of twisted-pair wiring: either UTP or STP. The first
pair of wires is used to receive data; the second is used to
transmit. To guarantee proper signal timing, 100BaseTX has a
distance limit of approximately 100 meters per segment.
Based on the IEEE 802.3 standard. See also Ethernet, and
IEEE.
ASCII An abbreviation of American Standard Code for Information
Interchange. A coding scheme that assigns numeric values to
letters, numbers, punctuation, and certain other characters.
BOOTP An abbreviation of Bootstrap Protocol. This is a protocol used
by a network node to determine the IP address of its Ethernet
interfaces, in order to boot a computer from a server via a
network.
Client Server A network environment in which the nodes communicate with
a file server, and not directly with other nodes.
DHCP An abbreviation of Dynamic Host Configuration Protocol. A
protocol allowing the principal parameters of network devices
(including IP Addresses) to be configured by central DHCP
servers.
DNS An abbreviation of Domain Name System. A system used in
the Internet for translating names of network nodes into
addresses.