Konica Minolta magicolor 3730DN - Manual (Page 113)

Ethernet Menu 3-4
Using the Network Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.
IP ADDRESS
AUTO
SPECIFY - IP ADDRESS
SPECIFY - SUBNET MASK
SPECIFY - GATEWAY
Purpose The IP address of the printer is automatically specified.
Purpose Sets the IP address of this printer on the network.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 192.168.1.2
Purpose Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 255.255.255.000
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 192.168.1.1