Konica Minolta magicolor 5650EN - Manual (Page 268)

Viewing Printer Status 248
Tray Mapping Settings
The Print - Default Settings - Tray Mapping Settings window provides the
following information.
Tray Chaining If Enable is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is indicated and the specified
paper tray runs out of paper, printing
stops.
Item Description
Tray Mapping Mode If On is indicated, Tray Mapping function is used.
If Off is indicated, Tray Mapping function is not
used.
Logical Tray 0-9 Indicates the tray that is used for printing when a
print job is received from another manufacture’s
printer driver.
Item Description