Konica Minolta bizhub PRO 1600P - Manual (Page 14)

Safety Information
4
Power source
WARNING
• Use only the power source of a specified voltage. Failure to do so could
result in a fire or electric shock.
• Connect the power plug directly into a wall outlet having the same
configuration as the plug. Use of an adapter leads the product being
subject to inadequate power supply (voltage, current capacity,
grounding), and may result in fire or electric shock. If proper wall outlet is
not available, the customer shall ask qualified electrician for the
installation.
• Do not use a multiple outlet adapter nor an extension cord basically. Use
of an adapter or an extension cord could cause a fire or electrical shock.
Contact your authorized service representative if an extension cord is
required.
• Consult your authorized service representative before connecting other
equipment on the same wall outlet. Overload could result in a fire.
CAUTION
• The wall outlet must be near the equipment and easily accessible.
Otherwise you may not pull out the power plug when an emergency
occurs.
Power plug
WARNING
• Do not handle the power plug with a wet hand, as an electric shock could
result.
• Insert the power plug completely into the power outlet. Failure to do so
could result in a fire or electric shock.
CAUTION
• Do not tug the power cord when unplugging. Pulling on the power cord
could damage the cord, resulting in a fire or electric shock.
• Remove the power plug from the outlet more than one time a year and
clean the area between its prongs. Any accumulation of dust may cause a
fire.