Konica Minolta bizhub PRO 1600P - Manual (Page 10)

8
Regulation Notices
m For Users in countries not subject to Class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause ratio interference in which case
the user may be required to take adequate measures.
This devise must be used with a shielded network cable. The use of non-shielded cables is likely to result in
interference with radio communications and is prohibited under CISPR rules and local rules.
m Ozone Release
Locate the Machine in a Well-Ventilated Room
A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may,
however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable,
healthy and safe operating environment, it is recommended that the room be well ventilated.
Placer l'appareil dans une piece largement ventilee
Une quantite d'ozone negligable est degagee pendant le fonctionnement de l'appareil quand celui-ci est
utilise normalement. Cependant, une odeur desagreable peut etre ressentie dans les pieces dont l'aeration
est insuffisante et lorsque une utilisation prolongee de l'appareil est effectuee. Pour avoir la certitude de
travailler dans un environnment reunissant des conditions de confort, sante et de securite, il est preferable
de bien aerer la piece ou se trouve l'appareil.
m USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING: The design and production of this unit conform to FCC regulations, and any changes or
modifications must be registered with the FCC and are subject to FCC control. Any changes made by the
purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
m INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.