Konica Minolta bizhub C31P - Manual (Page 55)

Checking the Printing Status and Print Log 9
9-4
9.2.1 Specifying the log setting
The maximum amount of log data that is saved can be set.
Operating procedure
1 In the main window, click the [Log View] button.
The List of Log dialog box appears.
2 Click the [Log Settings] button.
The Log Settings dialog box appears.
3 Specify the log capacity.
H A setting between 0 and 1,000 MB can be specified, however, a
capacity larger than the size of the computer's hard disk cannot be
specified.
4 Click the [OK] button.
Note
The default setting for “Log Capacity” is 0 MB. When “Log Capacity” is
set 0 MB, only the last log is saved. To save previous logs, specify an
appropriate setting for “Log Capacity”.