Konica Minolta magicolor 4650EN - Manual (Page 116)

Ethernet Menu 98
Accessing the Ethernet Menu
Use the following series of keystrokes at the printer to access the Ethernet
menu options on your printer. This menu provides access to all of the config-
urable network items.
"
Restart the printer if any of the following Ethernet settings are
changed.
z TCP/IP - ENABLE
z DHCP (Only when changed from OFF to ON)
z BOOTP (Only when changed from OFF to ON)
z ARP/PING (Only when changed from OFF to ON)
z IPP - ENABLE
z SLP - ENABLE
z SNMP - ENABLE
z IPv6 - ENABLE
z IPv6 - AUTO SETTING (Only when changed from NO to YES)
Press this
key . . . (until) the message window reads. . .
PROOF/PRINT MENU
or if no optional hard disk kit is installed:
PRINT MENU
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP