Konica Minolta BIZHUB C252 - Manual (Page 81)

2 Administrator Operations
2-62 C252
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
? What happens when HDD Format is executed?
% Executing HDD Format erases data in the HDD. It is recommended
that important data be saved in a backup medium in advance. Ex-
ecution of HDD Format will also reset the setting values of different
functions to the default values. Set the Enhanced Security mode to
[ON] again. For the functions whose settings are reset to the default
values, see “Items cleared by HDD Format” on page 2-11.
13
Make sure that a message appears prompting you to turn OFF and
then ON the main power switch. Now, turn OFF and then turn ON the
main power switch.
– To make the setting of [Encryption Priority] or [Overwrite Priority],
go to step 14.
? What is the difference between Encryption Priority and Overwrite
Priority?
% [Encryption Priority] refers to writing of data in HDD with an en-
hanced encryption strength. It is recommended that [Encryption
Priority] be selected to achieve a greater effect of encryption.
% [Overwrite Priority] refers to writing of data in HDD through the stan-
dard encryption technique.
% [Encryption Priority] is the default setting.
14
Call the HDD Setting menu to the screen from the control panel.
– For the procedure to call the HDD Setting menu to the screen, see
step 1 of “Setting the Encryption Key (encryption word)” on
page 2-58.
c252_security_E.book 62 ページ ２００７年４月１０日 火曜日 午後３時４５分