Konica Minolta BIZHUB C450 - Manual (Page 146)

Control Panel Settings 6
C450 6-21
Control Panel Settings
Chap
te
r 6
5
To overwrite the data, touch [Yes].
– To return to the Overwrite All Data screen without overwriting the
data, touch [No].
The message “Overwriting all data was completed. Turn OFF main SW
and ON” appears.
6
Follow the instructions in the screen to restart the machine.
The data on the hard disk is overwritten.
2
Reminder
While the data is being overwritten, do not use the main power switch to
turn the machine off and on.
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.
To specify the hard disk locking password
The password for locking the hard disk can be specified.
The hard disk locking password is extremely important in order to protect the
data on the hard disk. Keep the password in a safe place so that it will not
be lost.
1
In the Administrator Setting screen, touch [Security Setting].
2
In the Security Setting screen, touch [6 HDD Setting].
3
In the HDD Setting screen, touch [4 HDD Lock Password].