Konica Minolta bizhub PRO C6000L User Manual
Page 29
bizhub PRO C6000L
2-22
2.3
User Authentication in Enhanced Security Mode
2
Press [OK].
The entered password will appear as asterisks (********) on the screen.
% Passwords are case sensitive.
% If a wrong password or fewer than 8 alphanumeric characters are entered and [OK] is pressed, the
warning message [Password is incorrect / Please wait for a while] will appear, and no key will work
for five seconds. Enter the correct password after five seconds.
% The information on failed authentication will be saved in the audit log.
6
When user authentication is completed successfully, the Change User Password Screen will be dis-
played.
% Press [New Password], then enter a new password.
Press [OK].
NOTICE
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
% The information on failed authentication will be saved in the audit log.
% The current password cannot be used again as a new password.
7
Enter the new password again for confirmation.
% Press [Input Confirmation] to enter the same password as above.
Press [OK].
8
Press [OK].
The User Setting Menu Screen will be displayed.
9
Press [Exit].