Konica Minolta bizhub PRO C6000L - Manual (Page 12)

bizhub PRO C6000L 2-5
2.2 Security Functions 2
With the Enhanced Security mode activated, the machine rejects any setting change in [02 Date/Time Setting]
on the Utility Menu Screen.
Be sure to exit the administrator setting mode if you leave in front of the machine while using this mode.
IC card
With the Enhanced Security mode activated, the machine rejects the user authentication using an IC card.
USB port functions
The following functions are still available using a USB port even when the Enhanced Security mode is acti-
vated.
-
USB Memory ISW
- Storing data of List Print via USB
- Registering categories in Color Density Adjustment
- Registering data in Density Balance Adjustment
- Printing charts via USB (for CE)
-
Keyboard, mouse
Printer
A printer controller and a printer driver are required for printed output. Using the printer controller which sup-
ports the Enhanced Security mode, you can store the print data in the internal memory or on the HDD by
entering a user name from the printer driver. The stored data can be output after successful authentication
of the user name with its corresponding password entered from the printer driver when the data was stored.
Please note that the stored data can potentially be output by others if you use somebody else's user name
to store the print data.
For details of the printer controller and printer driver which support the Enhanced Security mode, contact
your service representative.
For the operation procedure of the printer controller or printer driver, please refer to the user's guide for each.
2.2.4 Data Protected by the Enhanced Security Mode
Use the Enhanced Security mode to prevent the data from being written to illicitly-switched HDD.
Data exempted from the protection of Enhanced Security mode
When the machine is connected to PCs on a local network, passwords entered from PCs are not subject to
the Enhanced Security mode. Please do not enter any password from such PCs for prevention of leakage.
Turning Enhanced Security mode ON/OFF
The administrator is responsible for turning the Enhanced Security mode ON/OFF.
The administrator should never fail to activate the Enhanced Security mode. Please be especially careful
when turning the Enhanced Security mode OFF, being aware that data can potentially be accessed.