Konica Minolta BIZHUB C351 - Manual (Page 22)

Overview 1
C351 1-9
Compatible Interfaces
The various interfaces that can be used to connect this printing system to a
computer are described below.
Ethernet Interface
Connect when using this printing system as a network printer.
Supports 10Base-T and 100Base-TX standards. In addition, the Ethernet in-
terface supports the TCP/IP (LDP/LPR, peer-to-peer), IPX/SPX (NetWare),
and AppleTalk (EtherTalk) protocols.
Parallel Interface (optional)
Connect when using this printing system as a local printer.
A computer running Windows and an IEEE 1284 parallel cable are required
for connection. Use a parallel cable that uses a terminal with an Amphenol
36-pin male connector.
The parallel interface supports the compatible, nibble, and ECP modes.
USB Interface (optional)
Connect when using this printing system as a network printer.
The USB interface can be connected to a computer running Windows or to
a Macintosh computer. A USB cable is required for connection. Use a type
A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring 3
meters or less is recommended.
The parallel and USB interfaces cannot be used simultaneously. You can
switch the interfaces in the administrator mode.