Konica Minolta bizhub C650 - Manual (Page 69)

2 Using copy functions
2-40 C650
Usin
g co
py fu
nct
ions
Chapter 2
2.12 Scanning the next document to be copied while a
copy job is being printed (next job reservation)
The settings for the next copy job can be specified and the document can be
scanned while a job is being printed so that it can be printed once the current
copy job is finished.
!
Detail
Up to 61 copy jobs, including the current copy job, can be queued.
A copy job can be reserved after scanning of the loaded document is finished.
The next job cannot be reserved while a document is being scanned.
1
If the message “Ready to accept another job.” appears while printing
the current job, a document can be loaded, and copy settings can be
specified for the next copy job.
– If the “Copy Operating Screen” parameter was set to “Yes”, touch [Next
Copy Job] in the screen that appears during printing to display the Basic
screen.
– For details on positioning the document, refer to "Feeding the document"
on page 1-12.
2
Press the [Start] key.
3
After the current job is finished, the next copy job begins.