Konica Minolta bizhub C650 - Manual (Page 27)

1 Before use
1-20 C650
Be
fo
re
u
s
e
Chapter 1
Selecting the position of the binding margin (Original Binding Position/
Binding Position settings)
If a double-sided document is loaded into the ADF, specify the position of the
top of the back side of the document by specifying the binding margin position
for the document.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document"
on page 1-12.
2
In the Basic screen, touch [Duplex/Combine]. Otherwise touch the
Original/Density tab.
Setting Description
Left Select this setting if the document is loaded with the binding margin at the
left.
Top Select this setting if the document that is loaded has a binding margin at the
top.
Right Select this setting if the document is loaded with the binding margin at the
right.
Auto With this setting, the binding margin is set at the top or at the left.
Select this setting to automatically select the position of the binding margin.
If the document length is 11-11/16 inch (297 mm) or less, a binding position
along the long side of the document is selected.
If the document length is more than 11-11/16 inch (297 mm), a binding
position along the short side of the document is selected.