Konica Minolta bizhub C250P - Manual (Page 20)

Administrator Operations 2
C250P 2-3
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
When accessing the Admin. Setting mode from the control panel, if [Ex-
port to the device] operation is being executed using the PageScope
Data Administrator, the machine displays a message that tells not to turn
off the power because of the remote operation being performed and re-
jects any operation on the control panel. Wait until the message disap-
pears before attempting to access the Admin. Setting mode once again.
1
Press the [Menu/Select] key.
2
Press the [ , ] key to display “Admin. Setting.”
? Is it possible to gain access to the Admin. Setting mode while a job
is being executed?
% The machine does not accept access to the Admin. Setting mode
while a job is being executed. Wait until the execution of the job is
completed before attempting to access the Admin. Setting mode
again.
3
Press the [ ) ] key.
c250P_security_E.book 3 ページ ２００７年４月１０日 火曜日 午後７時２７分