Konica Minolta BIZHUB C351 - Manual (Page 128)

Using fax functions 4
C351 4-13
Using
f
a
x
fu
nct
ions
Chapter 4
– [Pause]: Touch this button to insert a pause when
dialing. Touch [Pause] once to insert a 1-second
pause. In addition, multiple pauses can be
entered. “P” appears in the screen. If the PBX
(private branch exchange) connection is set to
“ON”, touch [Pause] after the outside line access
code (for example, “0”) for accurate dialing when
transmitting from an inside line to an outside line.
“P” appears in the screen.
– [–]: Touch this button to insert the dash as
separator symbol while dialing. This has no effect
on the dialing. “–” appears in the screen.
– [Abbr.]: Use the keypad to enter the abbreviated
dialing number (up to 2,000 from 0001 to 2000)
and specify a destination registered as an
abbreviated number.
To specify redialing
Dialing the same recipient again is called “redialing”.
1
In the Program screen, touch [Direct Input].
The Direct Input screen appears.