7 [printer settings, Auto continue, Paper settings – Konica Minolta bizhub 4050 User Manual
Page 46: Hold job timeout, Quality settings, Startup page setting
[Description of Utility Keys]
5-17
5.7
[Printer Settings]
5
5.7
[Printer Settings]
[Startup Page Setting]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Startup Page Setting]
Select whether or not to print the start page when turning this machine on.
[OFF] is specified by default.
[Auto Continue]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Auto Continue]
Select whether or not to continue printing when the paper size and type of print job are different from that of
the paper loaded in the paper tray.
[OFF] is specified by default.
[Paper Settings]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Paper Settings]
Specify the paper to be used ordinarily.
[Hold Job Timeout]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Hold Job Timeout]
Specify the time period during which a print job is stored on the HDD.
-
Select from [1 Hour], [4 Hours], [1 Day], or [1 Week].
-
When not holding a print job, select [Disable].
[Disable] is specified by default.
[Quality Settings]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Quality Settings]
Adjust the image quality of the printed image.
Settings
Description
[Paper]
Specify the size and type of the paper to be printed ordinarily.
•
[Paper Size]: Select the paper size when using standard-size paper. The
default value depends on the region the machine is used in.
•
[Custom Size]: Enter the width and length of paper when using custom-size
paper.
•
[Paper Type]: Select the type of the paper to be used. [Plain Paper] is spec-
ified by default.
[Measurement Unit Set-
ting]
Select a system of units for the paper to be used ordinarily from [mm] or [Inch].
The default value depends on the region the machine is used in.
Settings
Description
[Brightness]
Adjust the brightness of the printed image.
[0%] is specified by default.
[Contrast]
Adjust the luminance difference between light and dark in the image to be
printed.
[0] is specified by default.