Konica Minolta bizhub 4050 - Manual (Page 42)

[Description of Utility Keys] 5-13
5.5 [Network Settings] 5
5.5 [Network Settings]
[TCP/IP Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings]
Configure the settings to use this machine in a TCP/IP environment.
Settings Description
[Enable] Select whether or not to use TCP/IP.
[ON] is specified by default.
[IPv4 Settings] Assign an IP address (IPv4) to this machine.
[IP Address] When manually specifying the IP address, enter the fixed IP address.
[Subnet Mask] When manually specifying the IP address, enter the subnet mask.
[Default Gateway] When manually specifying the IP address, enter the default gateway.
[IP Application
Method Auto Set-
ting] When automatically specifying the IP address, select the method for automatic
retrieval.
•
[DHCP Settings]: [ON] is specified by default.
• [BOOTP Settings]: [OFF] is specified by default.
• [ARP/PING Settings]: [OFF] is specified by default.
• [AUTO IP Settings]: Fixed to [Enable].
[IPv6 Setting] Assign an IP address (IPv6) to this machine.
[Enable] Select whether or not to use IPv6.
[ON] is specified by default.
[Auto IPv6 Settings] Select whether or not to automatically assign the IPv6 global address of this
machine.
Selecting [Enable] automatically assigns the IPv6 global address based on the
prefix length notified from the router and this machine's MAC address.
[Enable] is specified by default.
[Global Address] When manually specifying the IPv6 address, enter the IPv6 global address.
[Gateway Address] When manually specifying the IPv6 address, enter the gateway address.
[Link-Local Ad-
dress] Displays the link-local address that is automatically specified from the MAC
address of this machine.
[DNS Host] Configure the DNS settings when a DNS server is used.
[Dynamic DNS Set-
tings] Select whether or not to enable the Dynamic DNS function.
When your DNS server supports the Dynamic DNS function, the specified host
name can be automatically registered on the DNS server or changes can be
automatically updated as long as [Enable] is selected.
[Disable] is specified by default.
[IPsec Setting ] Specify whether or not to use IPsec.
To configure the IPsec detailed setting, use Web Connection. For details, re-
fer to Chapter 1 "Using Web Connection" in [User's Guide: Applied Functions].
[Disable] is specified by default.
[IP Filtering (Permit Ac-
cess)] Select whether or not to specify an IP address that allows an access to this
machine in order to perform an access restriction.
To specify the IP address, use Web Connection. For details, refer to Chapter
1 "Using Web Connection" in [User's Guide: Applied Functions].
[Disable] is specified by default.
[IP Filtering (Deny Ac-
cess)] Select whether or not to specify an IP address that rejects an access to this
machine in order to perform an access restriction.
To specify the IP address, use Web Connection. For details, refer to Chapter
1 "Using Web Connection" in [User's Guide: Applied Functions].
[Disable] is specified by default.
[Raw Port Setting] Specify a RAW port required for Port9100 printing.
[Enable] Select whether or not to use the RAW port.
[Yes] is specified by default.
[Bidirectional] Select whether or not to enable bidirectional communication of the RAW port.
[OFF] is specified by default.