Konica Minolta bizhub 360 - Manual (Page 70)

2
Using copy functions
2-32 bizhub 360
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
2.10 Selecting the Paper settings
Specifying the paper size
The size of the paper loaded into the bypass tray can
be specified.
For details on selecting the Paper settings, refer to the
User’s Guide [Copy Operations].
The size of the paper loaded into the bypass tray can
be selected in any of the following ways.
In order to specify a custom paper size in Enlarge
Display mode, the custom paper size must first be
stored before entering Enlarge Display mode. For
details, refer to the User’s Guide [Copy Operations].
The following procedure describes how to specify the
size of the paper loaded into the bypass tray.
Setting Description
Auto Detect Select this setting to automatically detect the
size of the paper loaded into the 1st tray.
Custom Size A custom paper size can be set so that the
paper tray is used specifically with the
selected paper size.