Konica Minolta BIZHUB C30P - Manual (Page 105)

Specifying Printer Driver Settings 87
General
Select Color Specifies the color for printing as Color or
Grayscale.
„ The default setting is Color.
Staple Select whether or not to staple with the staple
finisher.
„ The default setting is Off.
Parameters Settings
Collate If On is selected, all pages in the documents
are printed as sets of printouts.
„ The default setting is Off.
Duplex Options Specifies the duplex print binding position as
Simplex, Long Edge, or Short Edge.
„ The default setting is Simplex
Paper Sizes Specifies the paper size. An irregular paper
size cannot be selected.
Paper Source Specifies the paper source as Tray 1, Tray 2,
Tray 3, Tray 4, Tray 1 (Manual Feed), or
Auto.
„ The default setting is Tray 1.
Paper Type Specifies the paper type as Printer Default,
Plain Paper, Recycled, Transparency,
Glossy, Glossy 2, Label, Thick 1 (91 -
150g/m
2 ), Thick 2 (151 - 210g/m 2 ), Letter-
head, Envelope, or Postcard.
„ The default setting is Printer Default.
Parameters Settings